How to Enable Mac Filtering on Victony WiFi Extender?
In the contemporary digital age, securing a wireless connection is important. Otherwise, you might fall prey to hackers and online threats. Moreover, anyone without any authorization can connect to your WiFi device. Thus, to avoid such scenarios, you can enable Mac filtering on your Victony WiFi extender. Once you have gone through Victony WiFi extender instructions and are done with the setup, you must secure its connection.
Relax! In case you are completely blanked out regarding how to enable Mac filtering, we can help you. Just go with the flow of instructions given below. Also, you need to ensure that the right sequence is being followed. Otherwise, numerous issues and complexities might arise. Keep reading.
Steps to Enable Mac Filtering on Victony Extender
Set Up Extender’s Hardware
You should start with setting up your hardware. Run a physical inspection to ensure that the device is in perfect condition. Further, ensure that you have an Ethernet cable by your side to make a connection with other devices.
To turn on the device, always go with a perfectly working power plug. Your Victony WiFi extender must fit perfectly into the wall socket.
The next step talks about the right placement of your Victony WiFi extender. It should be central and in a well-ventilated space within your house. Moreover, to enable Mac filtering, your extender should emit WiFi signals for the best reach and connectivity.
Hence, we suggest that you should minimize WiFi interference. That can be done by reducing the objects/things hampering the WiFi signals of your device.
Connection with Router
The host router has an integral role when you want to enable Mac filtering on your extender. Therefore, you have two options to connect them. At first, you can connect the device wirelessly. During the connection, always keep the router’s range in check.
Secondly, you can connect the Victony WiFi extender and router using an Ethernet cable. In this, make sure the cable is in perfect health.
Open Internet Browser
A PC is required to enable Mac filtering. However, we can assure you that a laptop can work equally fine. Furthermore, the system you are using should have the latest software version. After that, run an internet browser on your computer.
The internet browser should be compatible with the operating system of your web browser. If that is absent, the results you get might be different. Perhaps, the website won’t be open to doing the changes.
Log into Extender
The most crucial step is to log in to the Victony WiFi extender. Get the default extender web address, put it inside the address bar, and hit the Enter key. You will be redirected to the extender login page. Click on the empty username space and type in the required information.
Enter your default login passphrase in the space under the username. Take the cursor to the OK button. It will log you into the Victony extender setup wizard.
Access Advanced Settings
Move across the extender dashboard and access the Advanced Settings option. It is one of the most crucial options in Victony extender setup instructions. Go to Enable Wireless Access Control option to enable Mac filtering on your extender.
You need to enter the Mac Address that is unique for each device. After that, in the Comment section, you must leave a note about the device whose Mac address is being entered. It will help you differentiate the device from others.
The Comment section has a 20-character limit. Therefore, before hitting the Save button; re-check the information added to enable Mac filtering. You have the liberty to add more than one device. Save the settings.
You might get a pop-up message asking you to reboot the Victony WiFi extender. We recommend you restart your device.
Once you enable WiFi filtering, the only authorized device can access your extender. Hence, you can stay secure and browse the internet without having to worry about anything. It also means that your WiFi connection will only be accessible by limited people/devices.
Hence, you enjoy the perks of having a private network. In case you don’t want to continue with the settings, you have two options. At first, you can reset the WiFi extender. Or, you can hit the reset button in the enable Mac filtering settings. With it, your device will again have open settings. It might be suitable for users in case they are in an enclosed circle.