My Wireless-N WiFi Repeater Won’t Connect to Internet. Help!

The moment I completed the installation process of my Wireless-N WiFi repeater, it disconnected from the internet. I made multiple attempts. But, failed miserably to connect it to the internet again. Why my Wireless-N WiFi repeater won’t connect to internet? Is something wrong with my repeater? I need some guidance – A WiFi repeater user.

Is your story the same as we’ve just mentioned? Well, worry not! In this post, we will provide you with some valuable tips using which you can connect your WiFi repeater to the internet again. But, prior to that, let’s have a look at the potential causes dragging you towards this fate.

Wireless-N WiFi Repeater Won’t Connect to Internet [Whys]

Here are the topmost reasons why your device is denying the internet connection even after completing the WiFi repeater setup process:

1. Improper Repeater-Gateway Gap

During the initial setup, the user is advised to place the repeater closer to the host gateway (router). The major reason behind this is the facilitation of the WiFi signals propagation. If both devices are separated by an improper distance, a communication gap will arise between them and the WiFi repeater won’t connect to internet.

2. The LAN Cable Connection is Loose

Another reason behind the issue is also related to the connection/communication between the repeater and host gateway (router). But this time, we’re referring to their direct communication in which they are connected via a LAN cable. If your repeater is unable to connect to the internet, there are chances that the LAN connection has become loose.

3. Incorrect Location of the Repeater

When the WiFi repeater process is in its final stage, the user is advised to relocate the repeater. The whole purpose of doing this is to ensure that the signals amplified by the repeater get transmitted in every nook and cranny of the house. But, it seems that you’ve selected an improper location for your repeater due to which the problem has arisen.

So, these were the most potential causes that work together to cause the internet connection problem with the Wireless-N WiFi repeater. Now, it is time to have a look at the workarounds that can be implemented to resolve it. But, before you give a shot at any of the techniques mentioned below, consider power cycling the WiFi repeater. It will wipe out all network glitches and catalyze the troubleshooting process.

Wireless-N WiFi Repeater Won’t Connect to Internet [Fix]

1. Place the Repeater and Gateway Closer

You are suggested to bring your WiFi repeater a little close to the host gateway (router). This way, both devices will not only share a clear line of sight but the signal transmission process will also get smoothened. However, bring both devices closer never means that you can place them together on the same base. If you do so, the probability of their WiFi signals getting involved in a clash increases that creates the foundation of another repeater-related problem.

2. Strengthen the LAN Connection

The second thing that can be done to fix the Wireless-N WiFi repeater won’t connect to internet issue is the strengthening of the LAN connection. Make sure that the LAN cable joining the repeater to the main gateway is perfectly fitted. But, keep in mind that making a finger-tight connection won’t be of any help if the cable is not connected to the correct ports. The LAN port of the host gateway and the Internet port of the WiFi repeater must be employed for this purpose.

3. Change the Repeater’s Location

Have a look at the surroundings of your Wireless-N WiFi repeater. Is it a congested space? If yes, then you have not placed your repeater correctly. Consider bringing it into an open space. The cleanliness of the room must also be concerned. Apart from this, ensure that you’ve not kept the repeater near devices emitting electromagnetic frequencies and objects carrying a large amount of water. If possible, try to place your repeater away from shiny surfaces. Once done, try to access myrepeater.net and see if you get successful. If yes, then your repeater has been connected to the internet.

The Final Words

That’s all about what to do if your Wireless-N WiFi repeater won’t connect to internet. We are now expecting that you’ve successfully troubleshot the problem and the internet connection is back. In case nothing has worked in your favor, perform a 30-30-30 reset of your repeater and set it up again.