Rock Space WiFi Extender Setup

http://re.rockspace.local is the default web address for Rock space WiFi extender setup. When you enter the default Rockspace login details, all the settings of your Rockspace WiFi extender can be accessed very easily.

The web address, http://re.rockspace.local is not only used for Rockspace WiFi extender setup but also it allows you modify Rockspace WiFi extender, update its firmware, and so on.

For Rock space WiFi extender setup using http://re.rockspace.local, follow the guideline highlighted below:

Step 1: Plug in your Rockspace WiFi extender to an electrical outlet.
Step 2: Turn on a computer or laptop.
Step 3: Launch an internet browser as per preference.
Step 4: Visit Rockspace login page using http://re.rockspace.local to access rockspace setup page.
Step 5: Follow the on-screen instructions.
Great! You have performed Rockspace WiFi extender setup using the web address.

Troubleshooting Rock Space WiFi Extender Setup Issues

http://re.rockspace.local Not Working

Getting http://re.rockspace.local not working issue? Don’t worry! You are not alone. Every third Rockspace WiFi extender users experience the same issue.

You know why such type of issue happens? Well, let us tell you that this usually happens if you commit typing errors or minor mistakes.

By any chance, if http://re.rockspace.local is giving you not working issue, then use it without http:// extension. Now, the web address would be rockspace.local. Use rockspace.local to reach Rockspace setup page and perform Rock space WiFi extender setup process.

Apart from this, we also suggest you use an updated version of the internet browser. And, also make sure that your Rockspace WiFi extender is properly connected to your existing router.

Still, the web address is not working for you (with or without extension)? Don’t worry! To access the Rockspace login and to reach the Rockspace setup page for the configuration of your WiFi range extender, you can also use http://192.168.0.1 IP (with or without extension).

What is http://192.168.0.1?

The IP address work same as the Rockspace WiFi extender default web address. Look, Rockspace WiFi extender users have 2 IP addresses. One is for local communication within the home network and other one is for communicating outside the home WiFi. To perform Rockspace WiFi extender setup, the local IP is used. That means, you can use 192.168.0.1 IP for Rock space WiFi extender setup.

However, to access the Rockspace setup or Rockspace login page using the IP address, follow the step-by-step instructions highlighted below:

Step 1: Turn on your Rockspace WiFi extender and connect it to your router using any Ethernet or wireless source.
Step 2: Enter the IP address very carefully into the web browser’s address bar field.
Step 3: Press the Enter key and you will be taken to Rockspace login page.
Step 4: Provide the default (unless changed) Rockspace WiFi extender username and password in the required fields.
Step 5: Click Log In and thus, Rockspace setup page displays.

Rockspace WiFi Extender Login Password

To keep your Rockspace WiFi extender away from intruders, there are various things that you can do:

How to Update Rockspace WiFi Extender Firmware?

There are two methods through which you can easily update the firmware of your Rockspace WiFi extender:
Update Rockspace WiFi Extender Firmware via RS WiFi App:

Step 1: Connect your Rockspace WiFi extender and router using an Ethernet cable.
Step 2: Open your smartphone and connect it to your home WiFi.
Step 3: Download and install the RS WiFi app.
Step 4: Once the app gets downloaded, open it and log in to the app using valid details.
Step 5: If new firmware version is available, follow the on-screen instructions.
Note: It is strictly recommended – do not update the Rockspace WiFi extender firmware update process. The extender will restart once the process gets completed.

Update Rockspace WiFi Extender Firmware via Web Browser:

Important Notes

Step 1: Connect your router and Rockspace WiFi extender. Ensure that your devices are receiving a steady power supply.
Step 2: Open a web browser and enter the default IP or web address of your Rockspace WiFi extender in the URL bar.
Step 3: Navigate to the settings page of your Rockspace WiFi extender using correct Rockspace login details.
Step 4: Search for firmware update option. Once found, click on it and follow the instructions [provided on-screen.

The Rockspace WiFi Extender Firmware update process will be completed shortly.

Another security measure that you can take in order to secure your Rockspace WiFi extender is to change its password.

Change the Rockspace WiFi Extender Password

Step 1: Launch a web browser from a computer or laptop.
Step 2: Enter rockspace.local or the IP in the address bar and press Enter.
Step 3: Have access to Rockspace setup settings page.
Step 4: Go to Wireless and select basic, change the WiFi name and password.
Step 5: Once you are done, click Apply to save the changes.

Rockspace WiFi Extender Firmware Update Failed

There can be a vast number of reasons that might be preventing you from updating the firmware on your Rockspace WiFi extender using Rockspace.local or its IP. Some of the common yet major reasons behind the issue are outlined underneath:

Now that you are well aware of the reasons causing Rockspace WiFi extender firmware update failed issue, let’s take glance at its solutions highlighted below:

Be 100% sure that you have entered Rockspace.local or its IP correctly to access the Rockspace setup settings page. Apart from this, the extender’s default IP or the web address must not be entered in the browser’s search bar.

You must be connected to a stable WiFi. Regarding this, you can contact your ISP. Please get access to a continuous internet connection as soon as possible. Otherwise, you will get stuck with Rockspace WiFi extender firmware update failed issue.

By any chance, if the connection between your Rockspace WiFi extender and router is not stable, then also you may get firmware update failed issue. Thus, ensure to connect them properly.

If the issue continues to persists, power cycle your Rockspace WiFi extender. For this, unplug your extender, wait for a few minutes, and plug the extender back in.

We hope that the troubleshooting steps listed above helped you fix the Rockspace WiFi extender firmware update failed issue.

Rockspace WiFi Extender: FAQs

Q1: Continuously seeing red light on Rockspace WiFi extender?

Answer: Provide it a steady power supply and choose a non-damaged wall socket for it. On the off chance if you still see red LED on your device, reboot it once.

Q2: Unable to Access Rockspace Login Page?

Answer: Ensure to have the correct Rockspace extender’s username and password. If you have changed the default ones, consider using the customized details. And, if you have forgot or lost the customized ones, reset your Rockspace WiFi extender back to factory default values.

Q3: Why can’t I Access Rockspace Login page?

Answer: To have access to Rockspace login page, you must have the correct admin details handy.

Q4: Why Can’t I perform Rockspace WiFi extender setup?

Answer: For complete Rock space WiFi extender setup instructions, see its manual. If you don’t have the manual, get in touch with our technical executives right away.

Q5: Rockspace WiFi extender firmware update failed.

Answer: Make sure that you are downloading the correct firmware version as per the model you have. Refer to the official site of your device using Rockspace.local for details. Don’t forget, if you are getting issues regarding the same as well, our technical executives are 24×7 available to help you.

Q6: Rockspace extender connected but no internet?

Answer: Make sure that you are getting sufficient internet speed from your service provider end. And, what’s more? Your router and extender must be properly connected.

Q7: Rockspace extender SSID not found on network list

Answer: Make sure that you have enabled the SSID of your Rockspace WiFi extender. And, if you have changed it, ensure that you are searching for the correct one

Reset Rockspace WiFi Extender

Rockspace WiFi extenders are one of the advanced networking devices to consider in today’s modern era of technology. At times, such smart devices can become a pain in the head because they setup or router-related issues. To deal with such type of issues, we suggest users to reset their Rockspace WiFi extender back to factory default values.
Thus, to reset your Rockspace WiFi extender properly, here are the instructions to be followed:
Step 1: First of all, you have to disconnect your Rockspace WiFi extender from your router and other connected devices.
Step 2: Do not unplug the extender because a continuous power supply is very important during the entire reset process.
Step 3: Now, locate the reset hole on your Rockspace WiFi extender and once found, press it gently using a pin, toothpick, or paper clip.
Step 4: Keep holding the extender’s reset hole for some time and release it.
Until you reach this point, your Rockspace WiFi extender will be set back to factory default values.

Note: Resetting is one of the finest remedies to fix issues with Rockspace extender, no matter whatever issue (big or small) you are facing.

Once your Rockspace WiFi extender gets reset, perform the Rockspace WiFi extender setup from the scratch.

Just in case, you are still unable to perform Rock space WiFi extender setup process, feel free to let us know anytime.

Disclaimer: We provide online support and information to users struggling with issues related to Wavlink WiFi devices. Any depiction of images, logos, trademarks, and product images are just for informational purposes as we are not involved with any organization or brand. We are third-party online support service provider who provides services on-demand to users.