Tips to Fix Victony WiFi Extender Model US 402 Red Light

Every LED on your Victony WiFi extender model US 402 has different meanings. If the lights on your Victony device are green and stable, then everything seems to be fine. Just in case, any of the LED is blinking red, then there is something big you really need to think about.

Red light on your Victony extender means that:

• It is not getting enough power supply
• You have not connected it to your host router
• The firmware version on it has become outdated
• Or, it has not been configured in a proper way

Note: Here “it” we are referring to Victony WiFi extender model US 402.

But, you don’t have to worry! We will surely help you resolve the issue while relaxing on your couch. Simply walk through the tested and proven tips highlighted below and learn how to troubleshoot the red light issue on your victony wifi extender model us 402 in a jiffy.

Fixed: VictonyWiFiExtender US 402 Red Light

Fix 1: Check Your Internet Connection

We haven’t mentioned this, but poor internet connection can be one of the major reasons why you are struggling with red light issue with your Victony WiFi extender model us 402. So, before you take help of further tips, you need to verify your internet connection now.

On the off chance, you find that the internet range and services you are receiving is poor, immediately get it fixed.

On the other hand, verify the connection between your Victony WiFi extender model us 402 and router. Make sure that they are properly connected. If you have used an Ethernet cable, ensure that it is not worn out or damaged. But, if you have connected them wirelessly, then maintain a safe distance between them.

Fix 2: Perform Victony Extender Firmware Update

Another effective way through which you can get rid of “Victony WiFi extender model US 402 red light” issue is by performing the firmware update process. To perform Victony extender firmware update process while relaxing on your couch, all you need to access Victony WiFi extender login page, and thereafter, follow the given instructions.

Your Victony WiFi range extender will reboot itself once the firmware update process gets completed.

Fix 3: Reboot Your Victony Extender

Sometimes, technical glitches can also prevent your Victony WiFi range extender to perform smoothly, resulting in the red light issue. But, ease those worry lines from your forehead! You can get rid of these technical glitches in a jiffy by giving your Victony WiFi extender model US 402 a quick restart. Here’s how to execute the process:

• First things first, disconnect your Victony WiFi range extender from your host modem.
• Then, you need to power off the Victony device and unplug it.
• After unplugging the extender, wait for a couple of minutes.
• Thereafter, you can plug in your Victony device back into the wall outlet.
• Reconnect it (Victony extender) to your router.

See, if rebooting process have help you fix “VictonyWiFi extender model US 402 red light” issue.

Need More Help?

In case the issue still persists, then it is recommended that you perform a factory reset process on your WiFi range extender. The reason is, improper Victony extender setup can lead to the red light issue.

For resetting the Victony extender, all you have to do is to press and hold the reset button present on your device, hold on for some time, and release the button. Wait for a few seconds for your Victony extender to get resorted.

Now, try to access the Victony WiFi extender login page and configure it again.

After configuration, check if “Victony WiFi extender model US 402” issue is fixed. In case not, don’t delay much to get in touch with our online support team.