[Top Tips-to-Fix] Wireless-N WiFi Repeater Not Showing Up

Are you unable to set up the Wireless-N repeater via the myrepeater web address because of the Wireless-N WiFi repeater not showing up on the network list? Well, in that case, it is recommended that you walk through the tactics mentioned in this blog post. But, prior to that, you should learn what might have caused this issue. The reasons are as follows:

• Your repeater is not properly connected to the router.
• There is too much or less distance between the networking devices.
• The signals of your repeater are getting interrupted or blocked.

Do you think that you have become aware of the reasons behind the Wireless-N WiFi repeater not showing up on the network list issue? If yes, then waste no more time reading on and finding out how you can resolve it.

Wireless-N WiFi Repeater Not Showing Up Issue [Fixed]

1. Change the Connection Source

Start the troubleshooting process by checking if the connection between the Wireless-N repeater and the host router is stable or not. In case it is not, then it might be because the cable connecting the devices is damaged. In this case, you can either change the Ethernet cable currently in use with a new one or use a wireless source. In case you decide to choose an Ethernet cable, ensure that you are connecting the repeater and the router tightly. Apart from that, see to it that the ports located on them are not damaged. Otherwise, no matter what you do, you will not be able to resolve the Wireless-N WiFi repeater not showing up on the network list issue.

2. Check the Repeater-Router Distance

Too Much Distance: In case, the distance between the Wireless-N repeater and the host router is too much, it can make it impossible for their signals to get transmitted properly. In simple words, you will not be able to access the internet connection in most locations of your house. Sounds bad, right?

Too Less Distance: If the distance separating the networking devices is too less, then the signals which are emitted from them will clash. And if that happens, then forget about troubleshooting the Wireless-N WiFi repeater not showing up on the network list issue, you will end up getting stuck with similar ones in no time.

3. Keep Signal Interference at Bay

Bluetooth speakers, microwave ovens, mirrors, fish tanks, treadmills, televisions, cordless phones, washing machines, refrigerators, baby monitors, aluminum studs, etc are examples of things that block the signals of your Wireless-N WiFi repeater thereby causing the Wireless-N repeater not showing up on the network list issue. To eliminate this as one of the reasons behind it, you need to change the location of your wireless repeater. While changing its location, make sure that none of the examples given above are kept near. Also, it should not be placed in corners or near concrete walls. We hope that this tip helps you to get out of the mess that you are in.

4. Reset the Wireless-N Repeater

Did none of the aforementioned troubleshooting tips help you to resolve the Wireless-N WiFi repeater not showing up on the network list issue? Well, in that case, your last resort is to reset the networking device. Resetting the device means, you need to restore it to its default factory settings. All your customized settings will go back to their original values. In order to reset your device, press the Reset button on it and wait for 30 seconds at least. Once done, set up your networking again. The same can be done using the WPS as well as the manual method. To learn how to execute both processes, you can refer to the steps given in the manual which you might have received when you were purchasing the device.

Wrap Up

If you were careful while reading the troubleshooting hacks mentioned above, then nothing will be able to stop you from resolving the Wireless-N WiFi repeater not showing up on the network list issue. In case you are afraid that you might experience the same issue in the future, then it is recommended that you bookmark this post. Whenever you get stuck with it, simply open this post and resolve it in no time.