Victony WiFi Extender Not Showing on Network List [Resolved]
Is your Victony WiFi extender not showing on network list? Made various attempts to resolve the problem but still troubled by the same? No worries! It is quite normal for a user to come across such an issue. All you need to do is walk through the Victony WiFi extender troubleshooting techniques mentioned in this post to get it resolved. But, before that, consider having a look at the reasons that might be causing the issue.
Why Victony Extender Not Showing on Network List?
- Technical glitches
- Inappropriate distance between WiFi devices
- Faulty network cable
- WiFi interference from transmitting appliances
- Improper setup of extender
Whatever reason might have lead you to the Victony WiFi extender not showing on network list issue, following the hacks in the next section will help you fix it.
Fix Victony Extender Not Showing on Network List
Fix 1- Reboot Your Victony WiFi Extender
Let’s begin troubleshooting the problem with the simplest hack. Yes, you got it right. We’re talking about rebooting. Rebooting is one of the easiest and most effective solutions to get rid of minor bugs and errors that won’t allow the extender to perform better.
Relax! Rebooting doesn’t demand any technical expertise. It’s a simple act of giving some rest to your Victony WiFi extender. What you need to do is, switch off the extender, wait for a few moments, and switch it on back. After giving a shot to rebooting, see whether the Victony extender not showing on network list issue is still troubling you.
Fix 2- Reduce the Distance Between WiFi Devices
The distance between your WiFi devices (Victony extender and router) matters a lot when it comes to the extender’s performance. If you have placed your devices in two different corners of the house, then it’s no surprise that you are unable to see the extender on the network list. Therefore, consider bringing your Victony extender a little close to the router. We suggest you place them in the same room if you want to get the best from your range extender.
But, reducing the distance doesn’t mean that you can place your WiFi devices side-by-side. Doing so can also bring Victony WiFi extender login issues to your table along with the issue you are already facing. Want to know why? Because this act will result in WiFi signals of both devices to get involved in a clash.
Fix 3- Check the Ethernet Cable
An Ethernet cable is a direct medium that lets your Victony WiFi extender and router communicate more effectively. However, if it is damaged, it can also lead you to the Victony extender not showing on network list issue. So, check whether the Ethernet cable you are using is in perfect condition or not. If not, then replace it with a new one immediately.
Apart from being non-damaged, your Ethernet cable must be properly connected to the ports of the extender and router. Furthermore, ensure that the Ethernet port of your Victony extender is clean. The reason is that dust accumulated in it can affect the flow of communication via the Ethernet cable.
Fix 4- Avoid WiFi Interference
Electromagnetic waves emanating from devices and appliances like microwave ovens, smart televisions, Bluetooth speakers, treadmills, baby monitors, refrigerators, etc. affect the WiFi signals of your extender. Chances are that you have placed your WiFi device near any of these devices or appliances. So, confirm the same and relocate your Victony extender if it is placed close to electromagnetic waves emitting devices.
Additionally, make sure that your Victony WiFi extender is not placed near thick concrete, walls, reflexive surfaces, metal objects, or in corners. Once your extender gets placed at a proper location, you will be able to do away with the WiFi extender not showing on network list issue.
Fix 5- Reset the Extender
Tried every hack mentioned here, but the issue doesn’t seem to resolve? Well, it looks like the extender not showing on network list issue has originated due to the incomplete Victony WiFi extender setup process. Thus, you need to set up the extender correctly.
However, before that, you need to restore the extender to the factory default mode. The moment you do that, set up your extender again by accessing the ap.setup Victony login page.
In the Nutshell
Facing the Victony extender not showing on network list issue has become common nowadays. However, by taking care of a few things, you can easily fix it. We hope that the troubleshooting tips discussed above will help you get rid of the problem. Just in case you are still running out of luck, reach out to our experts for quick assistance.