Wireless-N Repeater Not Working? How to Fix the Issue?

Despite being one of the best networking devices in the WiFi industry, Wireless-N repeaters are refusing to work properly, as complained by a number of users. In case you are one of them, it is recommended that you walk through the solutions mentioned in this blog post. By the time, you have reached the last fix; the Wireless-N repeater not working issue would have gone far away from ruining your internet usage experience. Given this, continue reading.

How to Fix Wireless-N Repeater Not Working Issue?

Solution 1: Check the Power Supply

The primary reason why your Wireless N repeater is not in the mood of working properly is because it is not properly connected to the wall socket or the one that it is connected to is damaged. Whatever the case might be, you should connect your networking device to another wall socket. Just make sure that the one which you will choose is located in the same room where the host router is kept. This will ensure that signal transmission is happening properly and prevent you from facing much bigger issues than the Wireless-N repeater not working issue in the future.

Solution 2: Purchase a New Cable

Check if the cable through which your Wireless-N WiFi repeater is connected to the router is damaged or not. If the answer turns out to be yes, then you should not waste any more time taping it up. Although using a tape will help you out just like it has helped many people out there, on the off chance, it does not, then you are free to step out of your house and buy a new one. Once the new cable is brought, use it to connect the repeater and router. This can be done by connecting the cable to the port of the Wireless N repeater and the host router.

Solution 3: Update the Extender Firmware

Firmware updates are responsible for the proper functionality of your Wireless-N WiFi repeater. Apart from this, it fixes bugs and equips your device with the latest features. However, if you did not update the firmware of your extender to its latest version, then it is quite obvious why you are facing the issue in debate. Thus, update the firmware of your device right away. What is that? Are you not sure how to execute the firmware update process? Well, it requires the use of the WiFi repeater login password. To know in detail how to go about the process, refer to the user manual.

Solution 4: Reset Wireless-N Repeater

In case none of the aforementioned troubleshooting fixes worked for you, you should restore your networking device to its default factory mode right now. For that, you can read the info given in the next para. Locate the Reset button on the Wireless N repeater after ensuring that it is connected to a wall socket. For your information, you will find the button at the bottom or in one of the corners. As soon as you find it, press it carefully using a paper clip. Do this for 30 seconds to 5 minutes. Once your wireless repeater resets, it will start rebooting. Do not interrupt the process at any cost.

What Can Be Done After Reset?

Considering resetting your Wireless N repeater will restore it to its default factory mode, you will have to set it up from scratch. The same can be done with the help of two methods: the WPS method and the manual method. In the first method, the repeater and router, both should have the WPS button located on them and in the second method, you should have the default web address or the IP address to access the interface.

The Bottom Line

These were the troubleshooting fixes through which the Wireless-N repeater not working issue can be resolved. Hopefully, you will be able to resolve the issue at hand in no time if the above-mentioned fixes were followed by you carefully.

Assuming that you will be able to resolve the issue with ease, you are free to enjoy accessing a blazing-fast internet connection in every nook and cranny of your house without facing any technical issues.